| Technical Specifications |
| Model -> |
BM400C-C |
BM500C-C |
BM630D-C |
BM800D-C |
DK-7732C-C |
DK-7740C-C |
| Table Travel X,Y Axis (mm) |
320 x 400 |
400 x 500 |
500 x 630 |
630 x 800 |
320 x 400 |
400 x 500 |
| Work Table Size L x W (mm) |
420 x 650 |
500 x 785 |
600 x 900 |
660 x 1100 |
420 x 650 |
500 x 800 |
| Maximum Work Piece Thickness (mm) |
300 |
300 |
500 |
500 |
300 |
300 |
| Maximum Taper / 100 mm Thickness |
 3° (Standard) |
3° (Standard) |
|
3° (Standard) |
|
3° (Standard) |
| Maximum Work Piece Weight (kgs) |
400 |
500 |
800 |
3000 |
400 |
500 |
| Machine Weight (kgs) |
1800 |
2000 |
2300 |
4500 |
1600 |
1900 |
| Controller Specifications |
| Display |
LCD Display |
| Controller |
BMW 5000 (High speed) - AC Servo control for BM series and Stepper motor control for DK series machines |
| Control system |
Japaneese YASKAWA servo control system for BM series machines. |
| Max. Jog speed |
6000 mm/min. for BM series machines |
| PC |
Industrial PC # |
| Axis Control |
4 - axes (X,Y,U,V) |
| X, Y Axis Guide Ways |
Precision linear motion guide ways for X, Y axis |
| Wire tension mechanism |
Double direction servo wire tension (Auto wire tension) |
| Z axis |
Motorized Z axis |
| Resolution |
0.001 mm |
| Wire frame |
'C' Type |
| Wire Dia |
0.18mm (Std.), 0.15mm, 0.12mm (Optional) |
| Interpolation |
Linear and Circular |
| Programming |
Incremental |
| Least Input Increment |
0.001 mm |
| Least Command Input |
0.001mm |
| Data Input / Output System |
USB Port , Regular Keyboard and Mouse; Can read AutoCAD .dxf format |
| Input Power Supply |
3 Phase, 415 Volts, 50 Hz with Neutral and Earth |
| Total Machine Load |
3.0 KVA |
| Graphic Display |
Graphic display of part showing wire position |
| Processing and Data Entry |
Dual Screen, New programs can be entered while cutting previous programme |
| Auto Stop |
Auto Shut-off at the end of program |
| Dielectric Fluid |
Soft water (D.M Water) + Gel |
| Dielectric Tank Capacity |
55 Litres |
| Standard Features |
- Maximum Speed - 150mm2/Min.*
- Machining accuracy - 0.01mm *
- Best Surface Finish - Ra 1.00 *
- A.C. - Not Required up to 40° C
- Special arrangement for Aluminium cutting
- BMXP pm-k system software controller works on Windows 7 operating platform
- Inbuilt database for cutting different materials.
- Inbuilt NCCAD software to generate profiles
- Coolant filtering system - Fine stainless steel wire mesh for coolant filter
- No need to change wire guide for different diameters
- Two axis DRO (Std.)
- 4-Axes synthesizer to cut different profiles at top and bottom
- Auto centre find, auto edge find, auto shut-off at wire breakage and auto stop at the end of the job
Note: Due to continuous engineering improvements, specifications are subject to change without prior notice
* At Standard test conditions # Chasis
|
